split

gpx-rs/engine/src/engine/command/tools/split.rs

@@ -1,13 +1,332 @@
-use crate::{Apply, CommandError, State};
+use std::rc::Rc;
 
+use crate::{
+    Apply, CommandError, File, State, Track, TrackSegment, Waypoints, copy_segment, copy_track,
+    copy_waypoint,
+};
+
+use super::route::find_target;
+
+/// What is cut in two where the trackpoint is.
+#[derive(Debug, Clone, Copy, PartialEq, Eq)]
+pub enum SplitType {
+    /// The file becomes two files, which both have the waypoints (copies, in the second one).
+    Files,
+    /// The track becomes two tracks.
+    Tracks,
+    /// The segment becomes two segments.
+    Segments,
+}
+
+/// Cuts the file, the track or the segment of the trackpoint `at` of the selection (see
+/// `RoutingBuffer`) in two, there: the trackpoint is the last one of the first part and the first
+/// one of the second part.
+///
+/// The first part keeps the ids of what is cut, the second one has new ids, as the elements that
+/// come after the trackpoint (the following segments of the track, the following tracks of the
+/// file), which are moved to it. When the file is cut, the new file comes right after it. The
+/// selection does not change.
 #[derive(Debug)]
 pub struct Split {
     pub at: u32,
+    pub split_type: SplitType,
 }
 
 impl Apply for Split {
-    fn apply(self, _state: &mut State) -> Result<(), CommandError> {
-        // TODO
-        Err(CommandError::NotImplemented("split"))
+    fn apply(self, state: &mut State) -> Result<(), CommandError> {
+        let at = self.at as usize;
+        let target = find_target(state, at, at)?.ok_or(CommandError::NothingToDo)?;
+        let location = target.location;
+        let (file_id, trk, seg, index) =
+            (location.file_id, location.trk, location.seg, target.start);
+        let mut file = (*state.files[&file_id]).clone();
+        if index >= file.trk[trk].trkseg[seg].len() {
+            return Err(CommandError::InvalidData(
+                "trackpoint out of the segment".into(),
+            ));
+        }
+
+        let track = file.trk[trk].clone();
+        let segment = &track.trkseg[seg];
+        let (first, second) = (keep_up_to(segment, index), keep_from(segment, index));
+        // the track is cut: what is before the segment, and its first part, then the second part
+        // and what is after it
+        let split_track = || {
+            let mut first_track = track.clone();
+            first_track.trkseg.truncate(seg);
+            first_track.trkseg.push(first.clone());
+            let mut second_track = Track {
+                id: Default::default(),
+                trkseg: vec![second.clone()],
+                ..track.clone()
+            };
+            second_track
+                .trkseg
+                .extend(track.trkseg[seg + 1..].iter().map(copy_segment));
+            (first_track, second_track)
+        };
+
+        match self.split_type {
+            SplitType::Segments => {
+                file.trk[trk].trkseg.splice(seg..=seg, [first, second]);
+            }
+            SplitType::Tracks => {
+                let (first_track, second_track) = split_track();
+                file.trk.splice(trk..=trk, [first_track, second_track]);
+            }
+            SplitType::Files => {
+                let (first_track, second_track) = split_track();
+                let mut second_file = File {
+                    id: Default::default(),
+                    trk: vec![second_track],
+                    wpt: Waypoints::default(),
+                    ..file.clone()
+                };
+                second_file
+                    .trk
+                    .extend(file.trk[trk + 1..].iter().map(copy_track));
+                second_file
+                    .wpt
+                    .insert_at(0, file.wpt.iter().map(copy_waypoint).collect());
+
+                file.trk.truncate(trk);
+                file.trk.push(first_track);
+                let position = state.order.0.iter().position(|id| *id == file_id);
+                state.order.0.insert(
+                    position.map_or(state.order.0.len(), |p| p + 1),
+                    second_file.id,
+                );
+                state.files.insert(second_file.id, Rc::new(second_file));
+            }
+        }
+        state.files.insert(file_id, Rc::new(file));
+        Ok(())
+    }
+}
+
+/// The trackpoints of the segment up to `index` (included), in the same segment.
+fn keep_up_to(segment: &TrackSegment, index: usize) -> TrackSegment {
+    let mut part = segment.clone();
+    let len = part.len();
+    part.splice(index + 1, len, vec![]);
+    part.rev_id = Default::default();
+    part
+}
+
+/// The trackpoints of the segment from `index` (included), in a new segment.
+fn keep_from(segment: &TrackSegment, index: usize) -> TrackSegment {
+    let mut part = copy_segment(segment);
+    part.splice(0, index, vec![]);
+    part.rev_id = Default::default();
+    part
+}
+
+#[cfg(test)]
+mod tests {
+    use std::collections::HashSet;
+
+    use crate::{FileId, Load, Selection, TrackSegmentId, engine::command::fixture::Fixture};
+
+    use super::*;
+
+    fn loaded() -> (Fixture, FileId) {
+        let mut fx = Fixture::default();
+        let data = std::fs::read("data/with_tracks_and_segments.gpx").unwrap();
+        Load {
+            data: &data,
+            name: "file",
+        }
+        .apply(&mut fx.state())
+        .unwrap();
+        let id = fx.order.0[0];
+        fx.selection = Selection::File {
+            file_ids: HashSet::from([id]),
+        };
+        (fx, id)
+    }
+
+    fn split(at: u32, split_type: SplitType) -> Split {
+        Split { at, split_type }
+    }
+
+    fn lngs(segment: &TrackSegment) -> Vec<f64> {
+        segment.iter().map(|p| p.coordinates.lng).collect()
+    }
+
+    fn path(file: &File) -> Vec<f64> {
+        file.trk
+            .iter()
+            .flat_map(|t| &t.trkseg)
+            .flat_map(lngs)
+            .collect()
+    }
+
+    /// The index in the selection of the trackpoint `local` of the segment `seg` of the track `trk`.
+    fn index(file: &File, trk: usize, seg: usize, local: usize) -> u32 {
+        let before: usize = file
+            .trk
+            .iter()
+            .enumerate()
+            .flat_map(|(t, track)| {
+                track
+                    .trkseg
+                    .iter()
+                    .enumerate()
+                    .map(move |(s, segment)| ((t, s), segment.len()))
+            })
+            .take_while(|((t, s), _)| (*t, *s) != (trk, seg))
+            .map(|(_, len)| len)
+            .sum();
+        (before + local) as u32
+    }
+
+    /// A segment with enough trackpoints, and its position.
+    fn long_segment(file: &File) -> (usize, usize) {
+        file.trk
+            .iter()
+            .enumerate()
+            .flat_map(|(t, track)| (0..track.trkseg.len()).map(move |s| (t, s)))
+            .find(|(t, s)| file.trk[*t].trkseg[*s].len() > 4)
+            .unwrap()
+    }
+
+    #[test]
+    fn test_split_segments() {
+        let (mut fx, id) = loaded();
+        let before = fx.files[&id].clone();
+        let (trk, seg) = long_segment(&before);
+        let original = &before.trk[trk].trkseg[seg];
+        let len = original.len();
+
+        split(index(&before, trk, seg, 2), SplitType::Segments)
+            .apply(&mut fx.state())
+            .unwrap();
+
+        let after = &fx.files[&id];
+        assert_eq!(after.trk.len(), before.trk.len());
+        let segments = &after.trk[trk].trkseg;
+        assert_eq!(segments.len(), before.trk[trk].trkseg.len() + 1);
+        let (a, b) = (&segments[seg], &segments[seg + 1]);
+        // the point is the end of the first part and the start of the second
+        assert_eq!(lngs(a), lngs(original)[..=2]);
+        assert_eq!(lngs(b), lngs(original)[2..]);
+        assert_eq!(a.len() + b.len(), len + 1);
+        // the first part keeps the id, the second one is new
+        assert_eq!(a.id, original.id);
+        assert_ne!(b.id, original.id);
+        assert_ne!(a.rev_id, original.rev_id);
+        // the ends are anchors
+        assert_eq!(a[a.len() - 1].anchor, Some(0));
+        assert_eq!(b[0].anchor, Some(0));
+        // the rest of the file is untouched
+        for (i, segment) in before.trk[trk].trkseg.iter().enumerate() {
+            if i != seg {
+                let moved = if i > seg { i + 1 } else { i };
+                assert_eq!(segments[moved].rev_id, segment.rev_id);
+            }
+        }
+    }
+
+    #[test]
+    fn test_split_tracks() {
+        let (mut fx, id) = loaded();
+        let before = fx.files[&id].clone();
+        let (trk, seg) = long_segment(&before);
+
+        split(index(&before, trk, seg, 3), SplitType::Tracks)
+            .apply(&mut fx.state())
+            .unwrap();
+
+        let after = &fx.files[&id];
+        assert_eq!(after.trk.len(), before.trk.len() + 1);
+        let (a, b) = (&after.trk[trk], &after.trk[trk + 1]);
+        assert_eq!(a.id, before.trk[trk].id);
+        assert_ne!(b.id, a.id);
+        // the segments before are in the first track, the ones after in the second one
+        assert_eq!(a.trkseg.len(), seg + 1);
+        assert_eq!(b.trkseg.len(), before.trk[trk].trkseg.len() - seg);
+        assert_eq!(a.trkseg[..seg], before.trk[trk].trkseg[..seg]);
+        // new ids for everything that moved, so that they are unique
+        let ids: HashSet<TrackSegmentId> = after
+            .trk
+            .iter()
+            .flat_map(|t| t.trkseg.iter().map(|s| s.id))
+            .collect();
+        assert_eq!(
+            ids.len(),
+            after.trk.iter().map(|t| t.trkseg.len()).sum::<usize>()
+        );
+        // the path goes on, with the point twice
+        let mut expected = path(&before);
+        let at = index(&before, trk, seg, 3) as usize;
+        expected.insert(at, expected[at]);
+        assert_eq!(path(after), expected);
+        // the info of the track is the same
+        assert_eq!(a.info, b.info);
+    }
+
+    #[test]
+    fn test_split_files() {
+        let (mut fx, id) = loaded();
+        let mut file = (*fx.files[&id]).clone();
+        let wpt = crate::Waypoint {
+            name: Some("w".into()),
+            ..Default::default()
+        };
+        file.wpt.insert_at(0, vec![wpt.clone()]);
+        fx.files.insert(id, Rc::new(file));
+        let before = fx.files[&id].clone();
+        let (trk, seg) = long_segment(&before);
+        let at = index(&before, trk, seg, 1);
+
+        split(at, SplitType::Files).apply(&mut fx.state()).unwrap();
+
+        assert_eq!(fx.files.len(), 2);
+        let second_id = fx.order.0[1];
+        assert_eq!(fx.order.0[0], id);
+        assert_ne!(second_id, id);
+        let (a, b) = (&fx.files[&id], &fx.files[&second_id]);
+        // the first file stops at the point, the second one starts there
+        let all = path(&before);
+        assert_eq!(path(a), all[..=at as usize]);
+        assert_eq!(path(b), all[at as usize..]);
+        assert_eq!(a.info, b.info);
+        // each has the waypoints, the copy has its own ids
+        assert_eq!(a.wpt.len(), 1);
+        assert_eq!(b.wpt.len(), 1);
+        assert_ne!(a.wpt[0].id, b.wpt[0].id);
+        assert_eq!(b.wpt[0].name, wpt.name);
+        // nothing is shared by id between the two
+        let ids = |f: &File| -> HashSet<_> {
+            f.trk
+                .iter()
+                .flat_map(|t| std::iter::once(t.id.0).chain(t.trkseg.iter().map(|s| s.id.0)))
+                .collect()
+        };
+        assert!(ids(a).is_disjoint(&ids(b)));
+        // the selection is the same
+        assert!(matches!(&fx.selection, Selection::File { file_ids } if file_ids.contains(&id)));
+    }
+
+    #[test]
+    fn test_invalid_or_nothing() {
+        let (mut fx, id) = loaded();
+        let before = fx.files[&id].clone();
+        let total = path(&before).len() as u32;
+        assert!(matches!(
+            split(total + 5, SplitType::Segments).apply(&mut fx.state()),
+            Err(CommandError::InvalidData(_))
+        ));
+        // after the last trackpoint: appending, not a trackpoint
+        assert!(matches!(
+            split(total, SplitType::Segments).apply(&mut fx.state()),
+            Err(CommandError::InvalidData(_))
+        ));
+        fx.selection = Selection::Empty;
+        assert_eq!(
+            split(0, SplitType::Files).apply(&mut fx.state()),
+            Err(CommandError::NothingToDo)
+        );
+        assert!(Rc::ptr_eq(&fx.files[&id], &before));
     }
 }

gpx-rs/wasm/src/lib.rs

@@ -23,6 +23,25 @@ pub enum MergeType {
     Group,
 }
 
+/// What a split cuts in two.
+#[wasm_bindgen]
+#[derive(Clone, Copy)]
+pub enum SplitType {
+    Files,
+    Tracks,
+    Segments,
+}
+
+impl From<SplitType> for engine::SplitType {
+    fn from(t: SplitType) -> Self {
+        match t {
+            SplitType::Files => Self::Files,
+            SplitType::Tracks => Self::Tracks,
+            SplitType::Segments => Self::Segments,
+        }
+    }
+}
+
 #[wasm_bindgen]
 #[derive(Clone, Copy)]
 pub enum CleanType {
@@ -582,9 +601,16 @@ pub fn crop(start: u32, end: u32) -> bool {
     start <= end && edit(Command::Crop(engine::Crop { start, end }))
 }
 
+/// Cuts the file, the track or the segment (see `SplitType`) of the trackpoint `at` of the
+/// selection in two, there: the trackpoint ends the first part and starts the second one. Does
+/// nothing, and returns false, if the revision of the routing buffers is not the given one.
 #[wasm_bindgen]
-pub fn split(at: u32) -> bool {
-    edit(Command::Split(engine::Split { at }))
+pub fn split(revision: u32, at: u32, split_type: SplitType) -> bool {
+    routing_revision_is(revision)
+        && edit(Command::Split(engine::Split {
+            at,
+            split_type: split_type.into(),
+        }))
 }
 
 #[wasm_bindgen]